CL series industrial linear array camera
The CL series is a line array camera series product with a resolution range of 2k~16k. It supports data interfaces such as GigE, Camera Link, XoFLink, and supports multiple latest ISP and algorithm processing technologies to meet the application needs of various line array camera scenarios.
Diversified processing and flexible collection
The camera supports light/dark field correction Gamma、LUT、 Various ISP functions such as white balance, CCM, SC, etc. help users obtain higher quality image data;
At the same time, in addition to timed exposure, a pulse width controlled exposure acquisition method has been added, which, in conjunction with external (soft/hard) trigger signals, can flexibly adapt to external lighting conditions and exposure control requirements.
Lossless compression, high line frequency transmission
The new generation of Ethernet linear array cameras are equipped with image lossless compression technology, which breaks through network transmission bottlenecks and improves bandwidth utilization under GigE. The camera’s line frequency output can be further increased to 1.5-2.5 times, providing users with a more cost-effective solution choice.
Function characteristics
Rich ISP processing technology, supporting manual adjustment of Gamma correction, flat field correction LUT、 Black level adjustment, etc
Multiple flexible exposure and acquisition methods, supporting 2-TDI, with a maximum line frequency of 100 kHz
Support ROI line frequency (up to 200 kHz in single line mode)
Supports bidirectional I/O, input/output can be flexibly configured
Compact structural design, with mounting holes on both the front and side panels for flexible installation
Compatible with Camera Link protocol and GenICam standard
Order model
MV-CL082-92CM
External dimensions
Product specifications
Model | Product Model | MV-CL082-92CM |
Type | 8k pixels Linescan Cameras.Camera Link,Mono | |
Performance | Sensor type | CMOS |
Pixel size | 7 μm | |
Resolution | 8192 × 2 | |
Image mode | Supports 1-line, 2-TDI | |
Max. line rate | 20 kHz (Base), 40 kHz (Medium), 80 kHz (Full), 100 kHz (80-bit) | |
Configuration mode | Base, Medium, Full, 80-bit | |
Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 | |
Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps | |
Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz | |
Dynamic range | 63.4 dB | |
SNR | 40.8 dB | |
Gain | Supports 1.0 × | |
Exposure time | 3 μs to 10 ms | |
Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure | |
Mono/color | Mono | |
Pixel format | Mono 8/10/12 | |
Binning | Supports 1 × 1, 2 × 2, 4 × 4 | |
Reverse image | Supports horizontal reverse image output | |
Trigger mode | External trigger, internal trigger | |
External trigger mode | Line trigger, frame trigger, line + frame trigger | |
Electrical feature | Data interface | Camera Link (SDR connector); USB interface for updating firmware |
Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). | |
Power supply | 12 VDC to 24 VDC | |
Power consumption | Typ. 9.8 W@12 VDC | |
Mechanical | Lens mount | M72*0.75, optical back focal length: 12 mm (0.5″), applicable to F-mount via lens adapter |
Dimension | 76 mm × 76 mm × 42.1 mm (3.0″ × 3.0″ × 1.7″) | |
Weight | Approx. 320 g (0.7 lb.) | |
Ingress protection | IP40 (under proper lens installation and wiring) | |
Temperature | Working temperature: -20 °C to 55 °C (-4 °F to 131 °F) Storage temperature : -30 °C to 80 °C (-22 °F to 176 °F) | |
Humidity | 5% to 90% RH, non-condensing | |
General | Client software | MVS and frame grabber software meeting with Camera Link Protocol |
Operating system | 32/64-bit Windows 7/10 | |
Compatibility | Camera Link V1.2, GenICam | |
Certification | CE, RoHS2.0, KC |
Sensor response curve
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.